COMMON PARTS


MAJOR DRIVE BEARINGS -

MODELS: 1720 XM, 1720XMTC, 1720XMTC GOLD, SHOPMASTER 2000,
 ELDORADO BRIDGEMILL, SHOPMASTER TRI POWER, PATRIOT
MILL SPINDLE  UPPER TIMKEN  32006X
MILL SPINDLE    LOWER TIMKEN  32007X
MILL DRIVE PULLEY CARRIER SKF 6008 JEM
MILL IDLER  ( 2 ) FAFNIR 9104PP
LATHE SPINDLE PULLEY END TIMKEN 32007X
LATHE SPINDLE CHUCK END TIMKEN 32008X
(Some early 1720 XM models  use 32007X on both ends)
LATHE IDLER PULLEY ( 2 ) FAFNIR 9104PP

You can use these numbers to cross reference to other manufacturers.


REPLACEMENT DRIVE BELTS -

MODEL: ELDORADO TRI POWER AND PATRIOT

LATHE  MOTOR TO FIXED PULLEY ( 2) 3L 240
FIXED PULLEY TO IDLER 3L 250
IDLER TO SPINDLE PULLEY 3L 300
MILL MOTOR TO IDLER
3L 290
IDLER TO SPINDLE PULLEY                                
3L 330
POWER GEARBOX SPINDLE TO IDLER            
3L 320
POWER GEARBOX IDLER TO DRIVE                
3L 320

MODEL: ELDORADO BRIDGEMILL

LATHE MOTOR TO FIXED PULLEY ( 2)             
3L 240
FIXED PULLEY TO IDLER                                     
3L 250
IDLER TO SPINDLE PULLEY                                
3L 300
MILL MOTOR TO IDLER                                      
3L 250
IDLER TO SPINDLE PULLEY                                
3L 300


MODEL: SHOPMASTER 2000, SHOPTASK 1720 XMTC GOLD

LATHE MOTOR TO FIXED PULLEY   ( 2)            
3L 240
FIXED PULLEY TO IDLER                                      
3L 250
IDLER TO SPINDLE PULLEY                                 
3L 300
MILL MOTOR TO IDLER                                       
3L 340
MILL MOTOR TO IDLER (with Quadra lift option)
 		3L 460
IDLER TO SPINDLE PULLEY                                 
3L 340


MODEL: SHOPTASK  1720 XM, 1720 XMTC
LATHE MOTOR TO IDLER PULLEY                    
3L 280
IDLER TO SPINDLE PULLEY                                 
3L 320
MILL MOTOR TO IDLER                                       
3L 340
MILL MOTOR TO IDLER (with Quadra Lift option)
 		3L 460
IDLER TO DRIVE SPINDLE                                   
3L 340

Pease note:  The above belt numbers are Dayton brand.  You may use these to cross reference to other manufacturers.

Your machine comes equipped with metric belts which are 10MM cross section.  The Dayton belts are 3/8 " cross section.  To convert from metric size to inch size, follow this formula-  metric size divided by 2.5 equals inch size. Example  800 divided by 2.5 = 320  ( 3L 320 )