/2019 Millturn Specification
2019 Millturn Specification2019-07-18T09:11:59+00:00

STANDARD ACCESSORIES
FREE- WITH EVERY MILL TURN MACHINE:

VARIABLE FREQUENCY ( VFD) SPINDLE DRIVES
TWIN 2 HP 3 PHASE SPINDLE MOTORS
BUILT IN 3 PHASE INVERTER
ST 98 CI 4 AXIS STEPPER DRIVEN CNC SYSTEM
COMPUTER WITH WINDOWS XP AND MACH 3 SOFTWARE PRE-CONFIGURED
TOUCH SCREEN PLUS KEYBOARD, MOUSE, MONITOR AND POWER CABLES
4 AXIS GECKO DRIVES
STANDARD MACH III FREEWARE *
3 AXIS C-7 BALL SCREWS WITH DOUBLE MULTI TRACK BALL NUTS
6 GROUND COLUMNS WITH LINEAR BEARINGS FOR Z AXIS
3 AXIS DRO WITH EXCLUSIVE LATHE-MILL SWAP DISPLAY
1 7/16-20 DRAWBAR
SWING AWAY COMPUTER AND MONITOR MOUNT
FULL CABINET ENCLOSURE
CASTERS ON BENCH FOR EASY MOVING
1 R-8 DRILL CHUCK ARBOR
TELESCOPING TAILSTOCK
FOLD AWAY HANDLES ON X,Y AND Z AXES
1 MT 3 DRILL CHUCK ARBOR ( FOR TAILSTOCK)
1 6″ 3 JAW CHUCK & KEY
1 R-8 COLLET
1 TTS STYLE SHORT REACH ER 20 COLLET HOLDER
1 ER 20 COLLET
1 MT 3 CENTER
1 DRO SHIELDs FOR X ,Y and Z AXES
1 ONE SHOT OILING SYSTEM FOR X AND Y AXES
1 HIGH PRESSURE AIR TOOL COOLANT SYSTEM WITH MAGNET BASE
1 ALL STEEL BENCH WITH 6 LEGS
1 ADJUSTABLE HEIGHT AXA STYLE QUICKCHANGE TOOLPOST WITH 4 HOLDERS
1 SET TOOLS FOR MACHINE MAINTENANCE
1 MILL SPINDLE LOCK WRENCH
1 QUICK RELEASE AIR FITTING FOR COOLANT SYSTEM

OPTIONS-

6″ DIAMETER ROTARY TABLE
6″ CNC ROTARY TABLE
4 POSITION CNC TURRET TOOLPOST
STEADY REST
FOLLOW REST
6″ 4 JAW INDEPENDENT CHUCK
5C COLLET SYSTEM
LICENSE FOR ADD ON WIZARDS AVAILABLE FROM MACH 3.

Download our Shopmaster CNC PDF

MILLTURN SPECIFICATION

MILL TURN STANDARD ACCESSORIES

WARRANTY & TRADE-IN

GENERAL DIMENSIONS AND LATHE SPECIFICATIONS

LENGTH 54 “
WIDTH 31″
HEIGHT 82″ + – 1″ FOR LEG LEVELERS
SHIPPING WEIGHT 1250 #
MACHINE WEIGHT 1150 # INCLUDES BENCH
CRATE SIZE 54″W x 32″D x 43″H
FOOTPRINT 54″ WIDE X 32″DEEP X 84″ TALL (ADD 24″ WIDE FOR PC)
T SLOT SIZE 1/2″
POWER FEED X AXIS YES forward and reverse with cnc or Power feed
POWER FEED Y AXIS YES forward and reverse with cnc or Power feed
POWER FEED Z AXIS YES up and down with cnc or Power feed
TABLE SIZE 9″ X 19″
T SLOTS ON TABLE 3 FULL LENGTH EQUALLY SPACED
DISTANCE BETWEEN CENTERS 30″
DIAL CALIBRATION ON CROSSFEED DRO STANDARD
DIAL CALIBRATION ON LEADSCREW DRO STANDARD
DIAL CALIBRATION ON Z AXIS DRO STANDARD
FEED RATES ON X AXIS ADJUSTABLE 0-60 IPM UNDER CNC or Power feed
FEED RATE ON Y AXIS ADJUSTABLE 0-60 IPM UNDER CNC or Power feed
FEED RATE ON Z AXIS ADJUSTABLE 0-40 IPM UNDER CNC or Power feed
HEADSTOCK TAPER MORSE # 5
LATHE CHUCK BORE 1.59″
LATHE CHUCK DIAMETER 6″
LATHE CHUCK MAX WORK PIECE DIA. 6.32″
LATHE CHUCK MINIMUM WORKPIECE 0.125″ ( practical limit)
LATHE CHUCK MOUNT PLAIN BACK
LATHE CHUCK TYPE 3 JAW SELF CENTERING
SPINDLE ACCURACY T.I.R. 0.00076″
SPINDLE BORE 1.59″
SPINDLE SPEEDS 0-1600
SWING OVER BED 17″
SWING OVER CARRIAGE 7.5″
TAILSTOCK TAPER MORSE # 3
TAILSTOCK BARREL TRAVEL 6.25″ PLUS 4″ TELESCOPING
THREADS – INCH INFINITE
THREADS- METRIC INFINITE
Y AXIS TRAVEL 10″
TOOL BIT SIZE 0.125″ TO 0.50″
X AXIS TRAVEL WITH TAILSTOCK ON 16.5″
X AXIS TRAVEL WITH TAILSTOCK OFF 16.5″
OPTIONAL STEADY REST 2.5″ MAX DIAMETER
OPTIONAL FOLLOW REST 1.5″ MAX DIAMETER

MILL SPECIFICATIONS

SUPPORT COLUMNS – 6 1.25″ GROUND 7.50″ TOTAL DIAMETER
MILL HEAD TRAVELS ON LINEAR BEARINGS
DRAWBAR 7/16-20 THREADS 8.0″ WITH SPINDLE CENTERING BUSHING
DRILL CHUCK 0-1/2″
DRILL CHUCK ARBORS 2 R-8 AND MORSE # 3
FEED RATES MILL X AXIS ADJUSTABLE 0-60 IPM UNDER CNC or Power feed
FEED RATE MILL Y AXIS ADJUSTABLE 0-60 IPM UNDER CNC or Power feed
FEED RATE MILL/DRILL Z AXIS ADJUSTABLE 0-40 IPM UNDER CNC or power feed
MILL HEAD SPINDLE TO LATHE SPINDLE TRAM 0.001″
Z AXIS TRAVEL 10.5″
TTS STYLE TOOL HOLDER WITH 2 ER20 COLLETS
SPINDLE CENTER TO FRONT OF LATHE CHUCK 12″
SPINDLE CENTER TO LATHE SPINDLE FLANGE 14.75″
SPINDLE CENTER TO SUPPORT COLUMN 16.5″
SPINDLE TO TABLE DISTANCE 2′-15″
SPINDLE SPEEDS 0-4750
SPINDLE TAPER R-8
TOOL SIZE LIMITS ( END MILLS/DRILL) 1″ recommended
X AXIS TRAVEL 16.5″ (8.25″ right and left from center)
Y AXIS TRAVEL 10″ (5″ forward and back from center)

ELECTRICAL

MOTORS (2) 220 VOLT 60 HZ TEFC 6.3 AMPS EACH 4 POLE INVERTER DUTY
HORSEPOWER 2 rated at max VFD torque compensation
PHASE THREE
POWER CORDS 1   12 GUAGE   NEMA 6-15 PLUG
POWER REQUIREMENT 220 VOLT HOUSEHOLD OUTLET 20 AMP CIRCUIT
MOTOR MOUNTING FRAME IEC 100 face mount
MOTOR SHAFT SIZE 24 mm ( 15/16″)
MOTOR RPM 1400 @ 60Hz adjustable through VFD to 120 Hz=2800
INVERTER 220 VOLT SINGLE PHASE INPUT 220 VOLT 3 PHASE OUTPUT

OTHER

BENCH- ALL STEEL WELDED CONSTRUCTION 6 LEGS WITH ADJUSTABLE LEVELING PADS AND 4 CASTERS FOR MOVING BUILT IN DRIP TRAY FOR COOLANT SYSTEM
DRO MOUNTING ALL POINTS DRILLED AND TAPPED, SHIELDS AND HARDWARE ON MACHINE  AND COLOR MATCHED- DRO FULLY MOUNTED AT FACTORY
CNC MOUNTING AND HARDWARE CNC FULLY INSTALLED AT FACTORY INCLUDING X, Y, Z AND A AXES ( A AXIS OUTPUT FOR THE OPTIONAL CNC ROTARY TABLE)
CNC ENCLOSURE ALL STEEL SHEET METAL HOUSING INTEGRATED INTO THE MACHINE DESIGN. GECKO DRIVE , RS 232 CONNECTIONS AND COOLING FAN INSTALLED IN USA SWING AWAY COMPUTER AND MONITOR MOUNT
BALL SCREWS C-7 BALL SCREWS WITH DOUBLE MULTI TRACK DEFLECTOR NUTS INSTALLED AT FACTORY ON X, Y AND Z AXES.
HAND WHEELS X, Y, Z ROUND WITH FOLD AWAY HANDLES FOR CNC PROGRAM RUNNING
MACHINE FASTENERS STEEL
MOTIONS ALL SPINDLES RUN ON ANGULAR CONTACT SEALED BALL BEARINGS, MOTORS RUN ON SEALED BALL BEARINGS.

NEWS LETTER

SIGN UP FOR OUR NEWSLETTER AND SAVE 10% ON YOUR FIRST PURCHASE- AS MUCH AS 799.50 VALID UNTIL DEC 31 2019

ml_html_hidden