Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/shoptask/public_html/wp-content/plugins/revslider/includes/operations.class.php on line 2734

Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/shoptask/public_html/wp-content/plugins/revslider/includes/operations.class.php on line 2738

Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/shoptask/public_html/wp-content/plugins/revslider/includes/output.class.php on line 3679

Warning: session_start(): Cannot start session when headers already sent in /home/shoptask/public_html/wp-content/plugins/arscode-ninja-popups/arscode-ninja-popups.php on line 2074
Shopmaster CNC Turnado - Shopmaster Home cnc Machine tools

TURNADO

$6,995.00

TURNADO

A FULL CNC TURNING CENTER WITH 17″ SWING AND 30″ BETWEEN CENTERS-MORSE # 5 SPINDLE WITH 1.59″ DIAMETER THROUGH HOLE OPERATES BOTH MANUALLY AND FULL CNC

Category: Tags: ,

Description

A FULL CNC TURNING CENTER WITH 17″ SWING AND 30″ BETWEEN CENTERS-

MORSE # 5 SPINDLE WITH 1.59″ DIAMETER THROUGH HOLE

OPERATES BOTH MANUALLY AND FULL CNC

WORKING LENGTH 30”
SWING OVER BED 17”
SPINDLE TAPER MT 5
SPINDLE BORE 1.5”
HORSEPOWER 2
WEIGHT 1000#
CONTROLS GECKO+MACH 3

GENERAL

WIDTH 54 “
DEPTH 31″
HEIGHT 64” +/- 1″ FOR LEG LEVELERS
SHIPPING WEIGHT 850 #
MACHINE WEIGHT 800 # INCLUDES BENCH
CRATE SIZE 54″W x 32″D x 43″H
FOOTPRINT 54″ WIDE X 32″DEEP X 84″ TALL (ADD 24″ WIDE FOR PC)
T SLOT SIZE 1/2″
POWER FEED X AXIS YES – FORWARD AND REVERSE UNDER CNC OR JOG
POWER FEED Z AXIS YES – LEFT AND RIGHT UNDER CNC OR JOG
TABLE SIZE 9″ X 19″
T SLOTS ON TABLE 3 FULL LENGTH EQUALLY SPACED
DISTANCE BETWEEN CENTERS 30″
DIAL CALIBRATION ON CROSSFEED DRO STANDARD READS INCH OR METRIC TO 0.0001”
DIAL CALIBRATION ON LEADSCREW DRO STANDARD READS INCH OR METRIC TO 0.0001”
FEED RATES ON X AXIS ADJUSTABLE 0-MAX UNDER CNC OR JOG
FEED RATE ON Z AXIS ADJUSTABLE 0-MAX UNDER CNC OR JOG
SPINDLE TAPER MT 5
LATHE CHUCK BORE 1.60″
LATHE CHUCK DIAMETER 6″
LATHE CHUCK MAX WORK PIECE DIA. 6.32″
LATHE CHUCK MINIMUM WORKPIECE 0.125″ ( practical limit)
LATHE CHUCK MOUNT PLAIN BACK
LATHE CHUCK TYPE 3 JAW SELF CENTERING PLUS 4 JAW INDEPENDENT
COLLETS 5C SYSTEM WITH CLOSER AND 11 COLLETS
SPINDLE ACCURACY T.I.R. 0.00076″
SPINDLE BORE 1.6”
SWING OVER BED 17”
SWING OVER CARRIAGE 7.5”
MANUAL TOOLPOST AXA QUICKCHANGE STYLE WITH 5 HOLDERS
TAILSTOCK TAPER MORSE # 3
TAILSTOCK BARREL TRAVEL 6.25″ PLUS 4″ TELESCOPING
THREADS – INCH INFINITE
THREADS- METRIC INFINITE
X AXIS TRAVEL 10″
Z AXIS TRAVEL 19”
TOOL BIT SIZE 0.125″ TO 0.50″
X AXIS TRAVEL WITH TAILSTOCK ON 17″
X AXIS TRAVEL WITH TAILSTOCK OFF 19″

ELECTRICAL

MOTOR) 220/380 VOLT 60 HZ TEFC 15 AMPS 4 POLE INVERTER DUTY
HORSEPOWER 2 rated at max VFD torque compensation
PHASE THREE
POWER CORDS 1 14 GUAGE
POWER REQUIREMENT 220 VOLT HOUSEHOLD OUTLET 20 AMP CIRCUIT
MOTOR MOUNTING FRAME IEC 100 face mount
MOTOR SHAFT SIZE 24 mm ( 15/16″)
MOTOR RPM 1400 @ 60Hz adjustable through VFD to 120 Hz=2800
INVERTER 220 VOLT SINGLE PHASE INPUT 380 VOLT 3 PHASE OUTPUT

OTHER

BENCH- ALL STEEL WELDED CONSTRUCTION 6 LEGS WITH ADJUSTABLE LEVELING PADS AND 4 CASTERS FOR MOVING, BUILT IN DRIP TRAY FOR COOLANT SYSTEM
DRO MOUNTING DRO FULLY MOUNTED AT FACTORY
CNC MOUNTING AND HARDWARE CNC FULLY INSTALLED AT FACTORY INCLUDING X, AND Z.
CNC ENCLOSURE ALL STEEL SHEET METAL HOUSING INTEGRATED INTO THE UNIT WITH ALL ELECTRONICS INSTALLED AND PROTECTED.
BALL SCREWS C-7 BALL SCREWS WITH DOUBLE MULTI TRACK DEFLECTOR NUTS ON X AND Z AXES.
HAND WHEELS X AND Z ROUND WITH FOLD AWAY HANDLES FOR CNC PROGRAM RUNNING
MACHINE FASTENERS STEEL
MOTIONS LATHE SPINDLE RUNS ON DUAL ANGULAR CONTACT SEALED BALL BEARINGS SEALED FOR LIFE

Reviews

There are no reviews yet.

Be the first to review “TURNADO”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…