Turnado Specification 2017-10-03T15:03:05+00:00

TURNADO STANDARD ACCESSORIES

We have been selling the combo machines for 35 years, but recently
we have had a lot of requests for a lathe only from people who have
bought small CNC Mills. Most of the CNC lathes on the market are
either very small and limited in their capability or production machines
that are very expensive. Our lathe has a huge 17″ diameter swing, 30 ”
between centers, a 1.5″ spindle bore and 2HP VFD motor. Combined
with the USA MADE Gecko drives and the Mach 3 software it offers a
huge amount of machining capability at a very reasonable price. The
lathe is equipped with DRO STANDARD and can also be operated in a
fully manual mode.
The machine comes fully equipped with the list of accessories shown
below and is ready for shipment to you by truck freight. The machine
comes with our standard FULL 3 YEAR WARRANTY.
VARIABLE FREQUENCY ( VFD) SPINDLE DRIVES
2 HP 3 PHASE SPINDLE MOTOR
BUILT IN 3 PHASE INVERTER
ST 98 CI 4 AXIS STEPPER DRIVEN CNC SYSTEM
COMPUTER WITH WINDOWS XP AND MACH 3 SOFTWARE PRECONFIGURED**
KEYBOARD, MOUSE, MONITOR AND POWER CABLES
4 AXIS GECKO DRIVES
STANDARD MACH III FREEWARE *
2 AXIS C-7 BALL SCREWS WITH DOUBLE MULTI TRACK BALL NUTS
2 AXIS DRO INSTALLED
ST 29 6 PIECE CARBIDE LATHE TOOL SET
SWING AWAY COMPUTER AND MONITOR MOUNT PLUS SWING AWAY
TOOL TRAY
SPLASH AND CHIP GUARD WITH METAL BLACK SPLASH AND CLEAR
LEXAN COVER
STEEL BENCH WITHFULL CABINET ENCLOSURE
CASTERS ON BENCH FOR EASY MOVING
TELESCOPING TAILSTOCK
FOLD AWAY HANDLES ON X AND Z AXES
1 MT 3 DRILL CHUCK ARBOR, CHUCK AND KEY FOR TAILSTOCK
1 6″ 3 JAW CHUCK & KEY
1 6″ 4 JAW CHUCK AND KEY
1 5C COLLET SET WITH HEX BLOCK, SQUARE BLOCK AND COLLET
CLOSER
1 MT 3 CENTER
1 DRO SHIELDs FOR X AND Z AXES
1 ONE SHOT OILING SYSTEM FOR X AND Y AXES
1 HIGH PRESSURE AIR TOOL COOLANT SYSTEM WITH MAGNET BASE
1 ALL STEEL BENCH WITH 6 LEGS
1 SET TOOLS FOR MACHINE MAINTENANCE
1 QUICK RELEASE AIR FITTING FOR COOLANT SYSTEM
1 STEADY REST
1 FOLLOW REST
1 AXA QUICK CHANGE TOOL POST WITH 5 HOLDERS
1 4 POSITION CNC TOOLPOST

 

GENERAL

WIDTH 54 “
DEPTH 31″
HEIGHT 64” +/- 1″ FOR LEG LEVELERS
SHIPPING WEIGHT 850 #
MACHINE WEIGHT 800 # INCLUDES BENCH
CRATE SIZE 54″W x 32″D x 43″H
FOOTPRINT 54″ WIDE X 32″DEEP X 84″ TALL (ADD 24″ WIDE FOR PC)
T SLOT SIZE 1/2″
POWER FEED X AXIS YES – FORWARD AND REVERSE UNDER CNC OR JOG
POWER FEED Z AXIS YES – LEFT AND RIGHT UNDER CNC OR JOG
TABLE SIZE 9″ X 19″
T SLOTS ON TABLE 3 FULL LENGTH EQUALLY SPACED
DISTANCE BETWEEN CENTERS 30″
DIAL CALIBRATION ON CROSSFEED DRO STANDARD READS INCH OR METRIC TO 0.0001”
DIAL CALIBRATION ON LEADSCREW DRO STANDARD READS INCH OR METRIC TO 0.0001”
FEED RATES ON X AXIS ADJUSTABLE 0-MAX UNDER CNC OR JOG
FEED RATE ON Z AXIS ADJUSTABLE 0-MAX UNDER CNC OR JOG
SPINDLE TAPER MT 5
LATHE CHUCK BORE 1.60″
LATHE CHUCK DIAMETER 6″
LATHE CHUCK MAX WORK PIECE DIA. 6.32″
LATHE CHUCK MINIMUM WORKPIECE 0.125″ ( practical limit)
LATHE CHUCK MOUNT PLAIN BACK
LATHE CHUCK TYPE 3 JAW SELF CENTERING PLUS 4 JAW INDEPENDENT
COLLETS 5C SYSTEM WITH CLOSER AND 11 COLLETS
SPINDLE ACCURACY T.I.R. 0.00076″
SPINDLE BORE 1.6”
SWING OVER BED 17”
SWING OVER CARRIAGE 7.5”
MANUAL TOOLPOST AXA QUICKCHANGE STYLE WITH 5 HOLDERS
CNC TOOLPOST CNC DRIVEN TURRET WITH 4 POSITIONS
TAILSTOCK TAPER MORSE # 3
TAILSTOCK BARREL TRAVEL 6.25″ PLUS 4″ TELESCOPING
THREADS – INCH INFINITE
THREADS- METRIC INFINITE
X AXIS TRAVEL 10″
Z AXIS TRAVEL 19”
TOOL BIT SIZE 0.125″ TO 0.50″
X AXIS TRAVEL WITH TAILSTOCK ON 17″
X AXIS TRAVEL WITH TAILSTOCK OFF 19″
STEADY REST 2.5″ MAX DIAMETER
FOLLOW REST 1.5″ MAX DIAMETER

ELECTRICAL

MOTOR) 220/380 VOLT 60 HZ TEFC 15 AMPS 4 POLE INVERTER DUTY
HORSEPOWER 2 rated at max VFD torque compensation
PHASE THREE
POWER CORDS 1 14 GUAGE
POWER REQUIREMENT 220 VOLT HOUSEHOLD OUTLET 20 AMP CIRCUIT
MOTOR MOUNTING FRAME IEC 100 face mount
MOTOR SHAFT SIZE 24 mm ( 15/16″)
MOTOR RPM 1400 @ 60Hz adjustable through VFD to 120 Hz=2800
INVERTER 220 VOLT SINGLE PHASE INPUT 380 VOLT 3 PHASE OUTPUT

OTHER

BENCH- ALL STEEL WELDED CONSTRUCTION 6 LEGS WITH ADJUSTABLE LEVELING PADS AND 4 CASTERS FOR MOVING, BUILT IN DRIP TRAY FOR COOLANT SYSTEM
DRO MOUNTING DRO FULLY MOUNTED AT FACTORY
CNC MOUNTING AND HARDWARE CNC FULLY INSTALLED AT FACTORY INCLUDING X, AND Z.
CNC ENCLOSURE ALL STEEL SHEET METAL HOUSING INTEGRATED INTO THE UNIT WITH ALL ELECTRONICS INSTALLED AND PROTECTED.
BALL SCREWS C-7 BALL SCREWS WITH DOUBLE MULTI TRACK DEFLECTOR NUTS ON X AND Z AXES.
HAND WHEELS X AND Z ROUND WITH FOLD AWAY HANDLES FOR CNC PROGRAM RUNNING
MACHINE FASTENERS STEEL
MOTIONS LATHE SPINDLE RUNS ON DUAL ANGULAR CONTACT SEALED BALL BEARINGS SEALED FOR LIFE